Monday, July 29, 2013
For Smart Subscribers

Activating GPRS and MMS for Smart is important in order for you to access to a wide variety of features of this network. Smart has so many things to offer and you will be amazed on how this network showcases a lot of applications run in a mobile phone. Make sure that your mobile phone’s GPRS and MMS for Smart is activated if you also would like to access to the internet features and other advanced settings.


The nature of GPRS or Global Packet Radio System is common to GSM phones. When you put your Smart sim in your phone, you will notice that you will receive a confirmation message and it as much as possible suggest to the owner of the mobile phone of whatever unit it is to set-up MMS and GPRS for efficient execution of advanced applications. This is very essential and you can learn the process below.   

OTA (over-the air) configuration

a) To activate GPRS *and* MMS

  •  SET MMS send to 211
  •  wait for the configuration to be downloaded to your phone (up to 24 hours)
  •  once downloaded, you will have SmartMMS data account, and SmartMMS WAP profile, and your MMS is configured already to use SmartMMS WAP profile
  •  you will also receive a confirmation message that your GPRS and MMS have been activated

b) To configure internet access (full access)

  •  SET INTERNET (handset model) send to 211
  •  wait for the configuration to be download to your phone, in minutes
  •  once downloaded, you will have SmartPC data account, and SmartPC WAP Profile
  •  edit this account to include DNS settings. DNS IP addresses are -202.057.096.003, 202. 057.096.004. you only need one.

c) To configure WAP via GPRS

  1. SET GPRS T68 send to 211
  2. Wait for the configuration to be download to your phone, in minutes
  3. Once downloaded, you will have SmartGPRS data account, and SmartGPRS WAP Profile. SET THIS AS YOUR DEFAULT PROFILE

d) To configure WAP via CSD (Optional - kasi MAY BAYAD ITO, per minute)

  • SET WAP T68 send to 211
  • wait for the configuration to be download to your phone, in minutes
  • Once downloaded, you will have SmartWAP data account, and SmartWAP WAP Profile. SET THIS AS YOUR DEFAULT PROFILE


I suggest you clear all your existing data accounts and wap profile beforeyou do this. If you follow the instructions in this order, SmartPC will have a CID=2. Your dial-up number willbe *99***2#

or to simplify it:

Setting up of MMS and GPRS handsets: 

To download SMART MMS phone settings, key in SET MMS and send to 211.
To download SMART GPRS phone settings, key in SET GPRS and send to 211.

Activating SMART MMS and GPRS: 
To activate SMART GPRS, key in GPRS ON and send to 333.
To activate SMART MMS, key in MMS ON and send to 333

Upon receiving the configuration settings, select "Save All" to save the settings in the phone.

Activation of MMS and GPRS will require a confirmation message from SMART. A message will be sent to the sub once the feature has been activated.

0 comments:

Post a Comment